- Equipment tips
- Seed rate and treatment tips
- Soil and seedbed tips
- Drilling checklist
Drilling is perhaps the most important day in the life of any crop. Get it right, and with quick germination and even establishment of plants you set the crop off with its maximum potential intact.
But setting the drill up properly takes care and skill, from choosing the right settings for black-grass control to making sure you handle treated seed correctly. Read below for our tips to make your crops have the best possible start for the best finish.
Up seed rates by 30-50% to deal with grass-weeds, and/or consider variable seed rates on specific fields, or areas within fields.
Give more flexibility to drilling dates by protecting your crop from pests and seed-borne diseases.
✔️ Wear appropriate personal equipment (PPE) including gloves and coverall
✔️ Always read the seed tag
✖️ Don't broadcast or autocast any treated seed
✔️ Handle bags of seeds with care – abrasion results in dust; damage many result in spilt seed
✔️ Check that the drill has been properly maintained, calibrated and cultivators set up properly
✔️ Critically assess the prepared seedbed; does it have stony, cloddy or trashy areas which might limit the coverage of the seed?
✖️ Don't tip the dust into the drill – leave it in the seed bag
✔️ Keep bags secure, and dispose of waste seed bags and their contents safely
✔️ Clean up spills immediately – do not fill drills on grassy areas as spills will be harder to clear up
✔️ Ensure the drill will not drop seed when transported or when lifting in and out of work at headlands
✔️ Ensure the drill (especially if precision vacuum drill) does not vent into the air – if necessary fit an air deflector system
✔️ After you've finished drilling, check fields carefully – particularly headlands and turning areas to ensure seed is well covered. If any seed is exposed, cover it
Making sure the seed has good seed-to-soil contact is essential with direct drills as there is little or no seedbed preparation. Forward speeds are also important as pulling a drill through can create fissures and cracking in the soil.
Contact one of our technical team for more information or advice on getting the best start for your cereals crop this autumnYour local technical team